Window Type AC Cleaning

AC Cleaning services

MORE INFORMATION

Professional Window Type AC Cleaning – Breathe Cooler, Save More

Living in a tropical climate or a region with scorching summers makes your window-type air conditioner not just a luxury, but a lifeline. But when was the last time you looked past the front grille? Dust, mold, and bacteria accumulate rapidly in window AC units. That’s why professional window-type AC cleaning isn’t just a maintenance tip—it’s a necessity for your health, your electricity bill, and the lifespan of your unit.

At E2Y Pest Control & AC Cleaning Services, we don’t just wipe down the exterior. We perform a deep, chemical-grade disassembly clean that restores your AC to factory-like efficiency.

Why Regular Window Type AC Cleaning is Non-Negotiable

Many homeowners assume that rinsing the front filter every few months is sufficient. Unfortunately, that’s like washing only the doormat while the rest of the house remains filthy. The anatomy of a window AC includes an evaporator coil, a blower fan, a condenser coil, and a drain pan—all of which trap microscopic pollutants.

The hidden dangers of a dirty window AC:

– Poor cooling performance: Dirt acts as an insulator on coils, preventing heat exchange.
– Foul odors: Bacteria breeding in stagnant water on dirty coils produce a musty smell.
– High energy consumption: A dirty unit runs 30-40% longer to achieve the same temperature.
Respiratory issues: Mold spores blown directly into your room trigger asthma and allergies.

Our targeted window-type AC cleaning service eliminates these risks.

Our Signature 12-Step Window AC Cleaning Process

We don’t cut corners. Every unit undergoes our rigorous, transparent process. Here’s exactly what happens when you book our service.

Step 1: Pre-Inspection & Performance Testing
Before touching a single screw, we turn on your unit to measure ambient temperature, airflow velocity, and listen for unusual noises (compressor rattling or fan wobbles). We document the baseline performance so you can see the improvement afterward.

Step 2: Safe Electrical Disconnection
Safety first. We unplug the unit or shut off the dedicated breaker. We then remove the front panel, control board cover, and safely tape any exposed electronics to prevent water damage during washing.

Step 3: Filter Extraction & Deep Clean
We remove the washable filters. Unlike a simple rinse, we soak them in a biodegradable degreasing solution to dissolve cigarette tar, cooking oil, and pet dander, then pressure-wash them gently.

Step 4: Chassis Removal (Full Disassembly)
Many services clean the AC while it’s still in the window. We don’t. We carefully slide the entire metal chassis out of the sleeve (the outer shell). This gives us 360-degree access to both the room-side evaporator and the outdoor-side condenser.

Step 5: Blower Fan & Squirrel Cage Detailing
The blower fan—a cylindrical wheel covered in hundreds of fins—is the dirtiest component you never see. We use a steam cleaner and a specialized long-bristled brush to extract dust from between the fins. This step alone restores 20% of lost airflow.

Step 6: Evaporator Coil Treatment
We apply a non-acid, self-rinsing coil cleaner foam to the evaporator coil (the cold part facing your room). The foam expands, lifting embedded dirt from the aluminum fins. After 10 minutes of dwell time, we rinse it with low-pressure water.

Step 7: Condenser Coil Cleaning
The rear coils (facing outdoors) collect concrete dust, pollen, and exhaust soot. We use a high-pressure, adjustable nozzle—carefully set to avoid bending fins—to blast away years of grime.

Step 8: Drain Pan & Condensate Line Flush
A clogged drain pan causes water to leak into your room. We remove the pan, scrub away algae and rust, and use a wet/dry vacuum to suck out any blockage in the drain hole. No more mysterious puddles under your AC.

Step 9: Compressor & Fan Motor Degreasing
We wipe down the compressor housing and oil the fan motor bearings (if serviceable). Removing accumulated grease helps the motor run cooler and quieter.

Step 10: Cabinet Sanitization & Mold Inhibition
We spray the entire interior plastic housing with an EPA-registered antimicrobial agent. This prevents mold regrowth for up to 30 days and kills existing odor-causing bacteria.

Step 11: Reassembly & Sleeve Cleaning
While the chassis is out, we scrub the outer metal sleeve (the box fixed to your window) to remove bird droppings, dead insects, and rust. Then we carefully slide the clean chassis back in.

Step 12: Post-Clean Performance Test
We turn the unit back on. We measure outlet temperature (should drop by 5-8°F post-cleaning), check for vibrations, and ensure the remote control functions. You sign off only when you feel the difference.

Signs Your Window AC is Begging for a Deep Clean

Not sure if you need our window-type AC cleaning service? Look out for these five red flags:

1. Ice forming on the front grille—Restricted airflow causes the coil to freeze.
2. A wet spot on the wall below the AC—clogged drain pan overflowing.
3. The fan runs, but cold air is weak—the blower wheel is caked with dust.
4. A “dirty sock” smell—bacterial growth on the coil.
5. Your electric bill jumped 20% with no change in usage—the AC is working too hard.

If you notice any of these, call us today. Waiting will only damage the compressor

DIY vs. Professional Window-Type AC Cleaning: The Hard Truth

You might watch a YouTube video and consider doing it yourself. Here’s why that often fails:

| Aspect | DIY Cleaning | Professional Service |

You can clean the filter yourself monthly. But for the other 90% of the unit, leave the window-type AC cleaning to our certified technicians.

The Financial Case: Why This Service Pays for Itself

A dirty window AC is like a car with under-inflated tires—it wastes fuel. The U.S. Department of Energy estimates that cleaning a dirty evaporator coil can reduce energy consumption by 20-35%.

Let’s do the math. If your window AC costs $60/month to run in summer:
– Dirty unit cost: $60 x 4 months = $240
– Clean unit cost (30% less): $42 x 4 months = $168
– Savings in one summer: $72

Our window-type AC cleaning service costs less than $80. That means it pays for itself in one season. And because we reduce wear on the compressor, you extend your AC’s life from 5 years to 8-10 years. That’s a $400+ delayed replacement cost.

Our Service Guarantees

We stand behind every window-type AC cleaning job with transparent promises:

– Upfront pricing: No surprise fees. No “disassembly charges.” One flat rate per unit.
– No chemical runoff mess: We use drip trays and towels to protect your floor and window sill.
– Before & after photos: We’ll show you the black sludge we removed from your blower fan.
– 24-hour follow-up: We call you the next day to ensure the AC is still cooling perfectly.
– Satisfaction guarantee: If you’re not happy with the airflow improvement, we refund 100% and clean it again free.

Window Type AC Cleaning for Special Situations

Pet Owners
If you have dogs or cats, pet dander and fur weave into the coil fins. Our static-attachment brushes remove fur that standard vacuums miss.
Smokers in the Household
Nicotine tar coats the blower fan and creates a yellowish residue. We use industrial degreasers that dissolve tar without damaging plastic components.
Coastal / Salty Air Locations
Salt accelerates corrosion on condenser coils. We apply an anti-corrosive spray after cleaning to add 2 years of protection.

Book Your Window Type AC Cleaning in 60 Seconds

Don’t suffer through another sweaty night or pay inflated electricity bills. Whether you have one bedroom unit or five units across an office, we have the equipment and expertise to handle it.

What you get when you book today:
– Free on-site temperature check before cleaning
– 10% discount for booking two or more units
– Zero deposit required – pay after you feel the cold air

Call us now at 02 8650 3819 or fill out the form below. Mention “WINDOW1200” for a free antimicrobial sanitizer add-on (valued at $25).

Alternatively, text a photo of your window AC model number to
+63 920 974 3257, and we’ll send you a fixed price quote within 10 minutes.

Don’t just cover up the smell. Eliminate the source. Choose professional Window Type AC Cleaning today.

Frequently Asked Questions

Q: How often should I schedule Window Type AC Cleaning?

A: For normal use: once every 6 months (pre-summer and post-summer). For heavy use (24/7 operation or dusty areas): every 3 months.

Q: How long does the service take?

A: One technician takes 45 to 60 minutes per unit. Two units take about 90 minutes.

Q: Does cleaning fix a leaking window AC?

A: In 80% of cases, yes. Leaks are usually a clogged drain pan. We clear that in Step 8. If the chassis is rusted through, we’ll advise replacement.

Q: Will cleaning make my AC noisy?

A: No—it makes it quieter. We tighten all screws and lubricate the fan motor. The only thing you’ll hear is air movement.